Safety operation rules for Plastic Extruders

1, equipment inspection and maintenance regularly. It
2. Cover part of the transmission part. It
3. Check whether the lubricating oil is enough before each shift starts. There is no oil, water running, dropping and leakage in the equipment and pipeline valves. The electrical wiring insulation is reliable. It
4. Whether the equipment and fixtures are tightly installed or not, the installation and disassembly of the fixtures shall be protected, and no metal sharps shall be used to scratch the clean surface. It
5. Failure of equipment and equipment should be notified to professionals. Such
6. Wear gloves when installing and cleaning equipment so as not to burn hands. It
7. When driving, the hands and face must not face the extrusion die, so as to avoid personal injury accidents. It
8. In the production process, no cutting off material, no parking without reason, no excessive or low temperature, in order to avoid equipment and personal accidents. It
9. If noise is found in the production process and ammeter indication is abnormal, it should be checked and handled in time or be cleared up. It
10, extruders avoid empty cars, so as not to damage the cylinder and screw. It
11. The mould head and barrel must be cleaned when stopping. When coke is found in the production process, the mould head and barrel should be stopped and cleaned in time. It
12. Place the raw materials, finished products, workstation utensils and production tools in a clean and orderly manner on the production site, keep the worksite sanitary, do a good job of cleaning and disinfecting the surrounding workspace, and comply with the requirements of civilized production and labor safety.