Plastic PVC hose mahcine – maintenance method

1. Plastic PVC hose machine should be placed in the ventilation position to ensure that the motor heat dissipation, extend its life; The machine should maintain good grounding.
2. Check the tool screw regularly, after using the new machine for 1 hour, tighten the moving knife with the tool, fix the screw of the knife, strengthen the fixity between the blade and the tool holder; lubricate the bearing regularly to ensure the lubrication between the bearings; in order to ensure the sharpness of the cutting tool, check the tool regularly to ensure its sharpness and reduce the bluntness of the blade. Unnecessary damage to other components; regularly check whether the belt is slack and tighten in time.
Plastic extruder
3. Restart-Before the second start-up, the remaining debris in the chamber should be removed to reduce the starting resistance. The inertia cover and the belt wheel cover should be opened regularly to remove the ash outlet under the flange, and the powder discharged from the chamber of the crusher should enter the shaft bearing.
4. Replacement of parts – when replacing the cutting tool, the clearance between the moving cutter and the fixed cutter: 0.8MM of the crusher above 20HP is better, 0.5MM of the crusher below 20HP is better. The thinner the reclaimed material, the clearance can be adjusted appropriately.